Rough grinding machine LTSh-1
Rough grinding machine model LTSh-1 is intended for dry sharpening of tools (drills, cutters, etc.) and performing locksmith works (deburring, chamfering, etc.) - hereinafter referred to as the machine.
Applying appropriate accessories, the machine can be used for simple grinding work.
In terms of the impact of the external environment climatic factors, the machine is manufactured in the NF4 version for placement category 4.1 in accordance with GOST 15150-69.
Applying appropriate accessories, the machine can be used for simple grinding work.
In terms of the impact of the external environment climatic factors, the machine is manufactured in the NF4 version for placement category 4.1 in accordance with GOST 15150-69.
We will carry out
check out and start up
The machine consists of a pedestal on which an electric motor is rigidly attached.
The electrical equipment is installed inside the pedestal.
At the cylindrical ends of the electric motor shaft, two grinding wheels are installed, each of which is guarded with a fence, which has a protection screen and a safety visor, tool rests are attached to the pedestal.
There are openings for connecting a workshop exhaust network or an individual dust extraction unit on the rear sides of the guarding fence.
SAFETY PROVISIONS
Operation safety on the machine is ensured by its manufacture in accordance with the requirements of GOST 12.2.009-99, GOST IEC 60204-1-2007; GOST R 52588-2011.